Never fear to experiment. After all, what’s the worst thing that can happen? Maybe a less than satisfactory result. Even then, chances are you will have learned something from your effort that can be used to improve on the present experiment or be useful to another craft project.
Like most of my ideas, I borrowed this one and adapted it to my purposes. I saw a Pin displaying twisted wire flower crafts for making wearable art and decided to adapt the idea to making a fairy wand. That went ok so I tried a few other things… flowers, a butterfly, and a set of fairy wings.
If you try this tree start with an even number of wire pieces (I used 19 gauge black craft wire), at least eight to have sufficient wire for making the ‘legs’ or roots at the bottom and a good number of branches. For the leaves a thin beading wire is easy to work with and comes in many colors. I made a leafy wire garland and added it to the tree .
The basic technique for all of these projects is a simple loop. After you have a loop give it a couple of twists to keep its shape. To make the loop shape more leaf like insert a round object into the loop and then pinch the outer end of the loop with a pair of pliers.
Brush the leaf or flower petal area with nail polish. This works somewhat the way bubbles on a bubble wand works. If the area to be painted is small enough try to spread the brush out to cover the whole area and gently let the polish fill the hole. For larger areas start the polish in the tightest area holding the piece so that the polish clan flow down across the rest of the area. For the flower in the first picture I used a bit of acrylic paint for the flower center.
Go ahead and experiment with other shapes, paints and wires and as always, have a fairy good time. Marthe